Split Solution 2023

Flex : 8/10 - Stiff

Side cut: 296-252-285 for the 162cm model

Turn radius: 9.10 in the 162cm model


Camber:

Directional Rocker : classic camber with rocker for greater float and grip in all snow conditions. The longer tip rocker improves float, while the camber ensures edge hold and response. The shorter tail rocker not only provides the same power and stability than other boards, but prevents catch when entering turns and landing switch.

Shape :

Directional : The nose is longer and wider than the tail and the inserts have been set back on the back of the board. These features provide more lift in powder.

Tapered Shape, 12,5 mm : The tapered tail sinks into the powder for better flotation and faster turns.

Blunt Nose: the blunt nose provides the lift benefits of a longer nose without the rounded shape and extra weight.

Bolt-less Bridge : reduces the components of the link box and therefore reduce weight. In addition, the skis are more closely bonded, improving torsional rigidity.

3D Contour Base 3.0 : convex base shape. The edges are raised by 7mm in comparison to the centre of the board.

Inside & Outside Traction Tech 2.0 : The corrugated edges offer multiple contact points along the board which improves grip. This technology offsets the reduced length of the edge/snow contact points due to rocker.

Progressive Sidecut : The radius at the ends of the sidecut is slightly increased as the edge reaches the contact points. This larger radius ensures a smoother ride when entering and exiting turns.

Technology :

-Forever Flex: A manufacturing process that durably stabilizes the flex and rocker profile of the board.

- Ultra Split Core: The new Ultra Core is the lightest wooden core on offer. It is made primarily of Paulownia with poplar side rails, specially positioned for better durability and cornering power.

- Triax Fiberglass : Fiberglass sheet has been applied in multiple directions, which provides a precise and responsive ride on all terrains and in all snow conditions.

- Sustainable Flax/Basalt Stringers : 100% natural basalt stringers. Each support becomes more powerful and the torsional stiffness of the board is improved.

-Textured Eco-Plastic Topsheet: Topsheet made from castor beans. This environmentally friendly material is ultra-light, chip and scratch resistant and repels water and snow (snow sticks less to the topsheet).

- Stainless Steel Reinforcement: Stainless steel plate inserts are on the board's nose and tail.

- Sintered 9900 base: Sole made of UHMW-PE (Ultra-High Molecular Weight Polyethylene) and carbon. Extremely easy to repair, it also offers maximum glide properties.

- Karakoram Ultra Clip: Jones splitboards have Karakoram clips as well as hooks on the nose and tail. These tension-adjustable K-clips improve the board's torsional rigidity.

- Recycled Rounded ABS: - The ABS plastics in Jones boards are made from recycled plastic.

- Wend Natural Wax: Waxed with natural Wend wax, Jones boards are ready to use straight from the factory.

- Bio Resin: All Jones boards are now built with bio-based, renewable epoxy instead of petroleum based epoxy.

- Flip-Flop base : Base manufacturing process that reduces waste. There are two different base colours available that are delivered randomly.